Our Peak-based crews carry the parts and the know-how to get your air moving again today. Emergency dispatch available across Peak and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
If anything feels off after we leave, a follow-up call gets a technician back out to make it right.
Leonard HVAC was built by technicians who got tired of watching homeowners get oversold. Our crews carry manufacturer certifications across the major residential and commercial equipment lines.
You won't find us buried under layers of call-center scripts — we're the team that shows up in the truck, not a subcontractor we've never met. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, big or small.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Peak and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Peak is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Peak rooftop unit. Our warranty and service history records stay attached to your address, so any future technician who visits already has the full picture.
Whether it's a mid-summer breakdown or a planned system replacement, our Peak techs handle it with the same level of care.
Breakdowns rarely happen at a convenient time, which is exactly why our emergency line runs 24 hours a day. Our Peak dispatch team sends the closest available truck first so a technician is diagnosing your system as fast as physically possible.
Once a technician is on-site, the goal is always a same-visit repair — most emergency calls in Peak get resolved in a single trip, not a multi-day back-and-forth.
If your unit is past its expected service life, running loud, or spiking your utility bill, a replacement conversation is worth having. We walk Peak homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
Every install ends with a performance test, confirming airflow, temperature split, and refrigerant charge are all where they should be before we consider the job finished.
Commercial equipment operates differently than a residential unit, and it needs technicians who actually understand rooftop packages and multi-zone systems. Our commercial division services multi-zone commercial buildouts across Peak, with after-hours work to avoid disrupting business.
We understand that a commercial call isn't just about comfort, it's about keeping a business open.
A seasonal tune-up catches the kind of wear that turns into a mid-summer no-cool call. Beyond standard tune-ups, we also handle indoor air quality upgrades for homes with allergy or asthma concerns for Peak households that want more than just temperature control.
Maintenance plan members in Peak get scheduling reminders automatically, so tune-ups don't fall through the cracks during a busy season.
We'd rather set clear expectations upfront than make vague promises we can't back up.
Every repair comes with a workmanship warranty explained in plain terms before we leave.
If a competitor's written quote for the same scope of work is genuinely lower, ask us about it.
If anything feels off after we leave, one call gets a tech back to your Peak address.
Most breakdowns don't happen without warning — they announce themselves for weeks before the system actually quits.
A healthy system runs with a consistent, low hum — banging, screeching, or grinding usually points to a loose part or failing motor.
Weak airflow from the vents often traces back to a clogged filter, a failing blower motor, or leaking ductwork.
A system working harder than it should to hit the same temperature shows up directly on your utility bill.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
Chemical odors may signal a refrigerant leak, which requires a licensed technician to handle safely.
We'll always tell you honestly when a repair is the better call versus when it isn't.
We explain diagnostic fees and repair estimates before authorizing work.
Emergency calls get moved to the front of the line automatically.
If something isn't right after we leave, we come back and make it right.
Every technician carries current state licensing and manufacturer training.
You make the final call — we just make sure you have the full picture.
Replacement systems don't have to be paid in one lump sum.
Every review below reflects an actual service call in the Peak area.
"The furnace stopped working overnight and someone was at our door before 9am. Fixed on the first visit and explained everything in terms I could actually understand."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. Techs are always polite, always on time, and clean up after themselves."
"They handled the whole install in a single day, exactly like they said they would. New system is noticeably quieter and our energy bill actually dropped."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Documentation for our records was thorough and easy to file."
"Got quotes from four different companies for a replacement and this was the only one that actually walked me through the load calculation. My energy bill dropped noticeably the first month with the new system."
"Diagnosed a failed capacitor and had it swapped within the hour. No overnight surcharge shock — the price matched what dispatch quoted me on the phone."
None of these are unusual or embarrassing — they're just the normal wear and tear that comes with running a system through Peak's seasonal swings.
Homeowners who schedule a tune-up ahead of each season tend to call us far less often for emergency repairs. Before the coldest stretch of the year, a heating system benefits from a full safety inspection, checking the heat exchanger, ignition system, and airflow to catch any issue that could turn into a no-heat emergency.
Keeping vents unblocked by furniture and rugs helps maintain even airflow throughout the home. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Peak area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Here's a look at the kind of experience that shows up at your door.
Manufacturer-certified across multiple major residential equipment lines.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Focuses on commercial rooftop units, multi-zone systems, and facility maintenance contracts.
Standard appointments are usually scheduled within 24-48 hours, while true emergencies jump the queue.
We explain the diagnostic fee upfront and provide a flat-rate repair quote once the issue is identified.
Our emergency line runs 24 hours a day, including nights, weekends, and holidays.
We maintain current credentials because it protects both our customers and our team.
Our technicians walk you through the actual numbers — repair cost versus remaining system life versus new equipment efficiency — before making a recommendation.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
We cover Peak and the surrounding communities, including the zip codes listed in our coverage section below.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
Our technicians are trained across the major residential and commercial equipment lines, not limited to a single manufacturer.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Most Peak homes benefit from two tune-ups a year — one before cooling season and one before heating season.
Beyond basic safety checks, it's best to leave diagnosis to a licensed technician rather than attempting a repair yourself.
Our pricing is explained clearly before dispatch, and any after-hours consideration is communicated upfront — never as a surprise on the final invoice.
Most standard repairs are completed in under two hours once the technician has diagnosed the issue and you've approved the quote.
Let dispatch know ahead of time if access will be handled differently than a standard homeowner visit.
Housing stock varies a lot across Peak — older homes often still run original ductwork that needs different care than the sealed, high-efficiency systems going into newer builds.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Peak.
We accept standard payment methods for repairs and smaller jobs, and we'll always tell you upfront what a given service is likely to cost so there's no last-minute scramble to figure out payment. If a rebate or local incentive program applies to your Peak installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
We dispatch throughout Peak and the neighboring communities, keeping response times tight because our trucks stay close to home.
Coverage isn't limited to a single neighborhood or subdivision — our Peak dispatch zone stretches across the metro area and into the surrounding suburbs and unincorporated communities.
